3M™ Dynatel™ Advanced Modular System 965AMS | Introduction |
Introduction
Getting Started
1.Press the red 
key to power up the unit or to power down the unit.
2.Press the 
key to change the contrast. Use the 
or 
keys to adjust the contrast on the screen.
3. F1 through F5 are the soft keys. Their function is displayed in the box above the key.
Example: To use the AC
Volts, press F5.
4.At the beginning of each chapter there will be a wiring diagram showing the test lead
RED Ring (B) 1
GRN Ground
BLK Tip (A) 1
YEL Ring (B) 2
BLU Tip (A) 2
5
