3M 965AMS Auto Test>Vacant Wideband, Measurement Functions, Insertion, Single, Sweep Frequencies

Measurement Functions 3M™ Dynatel™ Advanced Modular System 965AMS

Auto Test>Vacant Wideband

Use Vacant Wideband to perform an automatic sequence of tests on Vacant Wideband circuits. The tests include: DC Voltage, AC Voltage, DC Resistance, Opens, % Capacitance Balance, Load Coil, Wideband Loss, Wideband Noise, Longitudinal Balance, Slope, Resistance Balance (loop) and Resistance Balance (% diff).

Note: You must use a 3M™ Dynatel™ Far End Device II 1342 or 1343 to use the Vacant Wideband function.

Insertion Loss Frequencies and Sweep Frequencies by Service Type

Insertion	Single	Sweep Frequencies
Loss	Frequency*
Sweeps
Pots	1004 Hz	404, 804, 1004, 1204, 1404, 1604, 1804, 2004,
		2804, 3004 (Hz)
56k	28 kHz	20, 28, 32, 40, 48, 82 (kHz)
64k	32 kHz	20, 28, 32, 40, 48, 82 (kHz)
ISDN	40 kHz	20, 28, 32, 40, 48, 60, 70, 82 (kHz)
HDSL	196 kHz	20, 30, 50, 70, 90, 110, 130, 196, 400 (kHz)
T1	772 kHz	200, 400, 500, 700, 772, 1024 (kHz)
E1	1024 kHz	200, 400, 500, 700, 772, 1024 (kHz)
ADSL	138 kHz	20, 30, 50, 69, 90, 110, 138, 276, 400, 600, 800,
		1000, 1100 (kHz)
H2/4ACC	196 kHz	50, 80, 130, 196, 250, 300, 350 (kHz)
H4RACC**	N/A	20, 30, 50, 70, 90, 110, 130, 196, 400 (kHz)
H4NACC***	N/A	20, 30, 50, 70, 90, 110, 130, 196, 400 (kHz)
ADSL2	138 kHz	20, 30, 50, 69, 110, 138, 276, 400, 600, 800, 1100,
		1500, 1800, 2200 (kHz)

*Pass/Fail provided for Single Frqeuency when measuring just Single Frequency or in Sweep Mode.

**Pass/Fail provided for 50 kHz, 90 kHz and 130 kHz

***Pass/Fail provided for 50 kHz, 90 kHz, 130 kHz and 196 kHz

174