8.
The Auto TDR mode automatically finds potential faults and displays an icon that represents
the type of fault. Press Auto TDR to use this
function.
5.
TDR>Single Trace Mode>Operation
3. This screen shows the end of a pair at 205 feet.
Measurement Functions
3M™ Dynatel™ Advanced Modular System 965AMS
4.Use the TDR Controls section in this chapter to see all of the parameters that you can adjust.
6.This trace shows a resistive fault at 219 feet.
7.The Auto TDR is not a live trace, but you can use the Gain, Cable length, Span and Filter functions.
If you change the circuit you must capture a new trace. Press Live TDR then
press Auto TDR .
9.This trace shows an open at 322 feet.
122
