3M 965AMS manual Care & Maintenance, System Modes

3M™ Dynatel™ Advanced Modular System 965AMS Care & Maintenance

Care & Maintenance

System Modes

1.The 965AMS tester is a microcomputer-controlled device that is very similar to a laptop computer. The tester will be in one of 3 modes: Active, Standby, or Power Down.

2.Active Mode: Press the red key to wake-up the tester. It is ready to use. The amount of time the tester will stay in the active mode without pushing a key is controlled by the Power-Down Timeout setting. Your choices are 5, 10 and 15 minutes.

3.Standby Mode: When you finish using the tester, press the

red key to go into the Standby Mode.

4.Power Down Mode: This mode uses a very small amount of power. This mode is recommended for extended down time such as overnight or weekends and vacations. To power

down the tester, press and hold the red key for 10 seconds to go into Power Down Mode.

Note: The tester is still using battery in Standby Mode. To preserve battery life it is recommended that you power down the tester overnight.

191