Agilent Technologies 75000 Series C, E1445A 42 Verification Te sts Agilent E1445A Serv ice Manual

Test 2-3: DC Offset (cont’d)
Test Procedure
(cont’d)
Perform steps 5 - 7 for each offset listed in Table 2-3:
5. If necessary, change the AFG out put amplitude:
VOLT:OFFS 0; Set offset to 0
:VOLT <amplitude> Set amplitude
where <amplitude> is the value specified in Table 2-3.
6. Set AFG offset voltage:
VOLT:OFFS <offset> Set offset
where <offset> is the value specified in Table 2-3.
7. Trigger the DMM and record the r eading.
Table 2-3. DC Offset Test Points
Offset
(volts) Amplitude (volts) Test Limits (volts)
9.755
4.000
-4.000
-9.755
2.000
-2.000
2.29189
2.29189
2.29189
2.29189
0.40756
0.40756
9.755 ± 0.1196
4.0 ± 0.0620
-4.0 ± 0.0620
-9.755 ± 0.1196
2.0 ± 0.0244
-2.0 ± 0.0244
42 Verification Te sts Agilent E1445A Serv ice Manual