Aiwa XR-DV3M Manual Tuning, Press TUNER/BAND repeatedly to select the desired band

RADIO

RECEPTION

MANUAL TUNING

MONO TUNER

BAND

SHIFT

POWER

r,t

TUNER/

BAND

r,t

1Press TUNER/BAND repeatedly to select the desired band.

FM AM

When TUNER/BAND is pressed while the power is off, the power is turned on directly.

To select a band with the remote control

Press BAND while pressing SHIFT.

NOTE

•When you switch to the tuner function from the DVD/CD function while "READING" flashes on the display, it may take up to 10 seconds before the sound actually switches to the tuner.

•When you switch to the tuner function, the monitor is automatically turned off.

2Press r or t to select a station.

Each time the button is pressed, the frequency changes. When a station is received, "TUNE" is displayed for 2 seconds. During FM stereo reception, 1 is displayed.

1

To search for a station quickly (Auto Search)

Keep r or t pressed until the frequency starts to change rapidly. After tuning in to a station, the search stops.

To stop the Auto Search manually, press r or t.

• The Auto Search may not stop at stations with very weak signals.

When an FM stereo broadcast contains noise

Press MONO TUNER while pressing SHIFT on the remote control so that "MONO" appears on the display.

Noise is reduced, although reception is monaural.

To restore stereo reception, repeat the above so that "MONO" disappears.

To change the AM tuning interval

The default setting of the AM tuning interval is 10 kHz/step. If you use this unit in an area where the frequency allocation system is 9 kHz/step, change the tuning interval.

Press POWER while pressing TUNER/BAND. To reset the interval, repeat this procedure.

NOTE

When the AM tuning interval is changed, all preset stations are cleared. The preset stations have to be set again.

32 ENGLISH