Aiwa XR-DV3M Playing a VCD Without Using Playback Control PBC, Press r or t during play

0-9,+10

PBC

SHIFT

c/d r,t

c

r,t

PBC

FAST FORWARD/REVERSE PLAY

Hold down r or t during play until the guide display such as "g x 2" appears.

The DVD is played 2 times faster than the normal speed. The VCD is played 5 times faster than the normal speed. To return to normal play, press c.

To change the playing speed

During fast forward/reverse play, hold down r or t until the guide display appears.

For DVDs, this operation switches the playing speed between 2 times, 8 times and 32 times.

For VCDs, this operation switches the playing speed between 5 times and 16 times.

To return to normal play

Press c.

NOTE

•There is no audio during fast forward/reverse play.

•Fast forward and reverse play are not possible with certain DVDs.

SKIPPING

Press r or t during play.

With each press of t, the disc position skips to the succeeding track.

When r is pressed once, the disc position skips back to the beginning of the current track/chapter.

When r is pressed twice or more, the disc position skips back to the previous track(s)/chapter(s).

NOTE

Skipping is not possible with certain DVDs.

20 ENGLISH

PLAYING A VCD WITHOUT USING PLAYBACK CONTROL (PBC)

With PBC (PlayBack Control), play of VCDs is controlled from the menu display on the monitor screen, and the menu display appears automatically after play of each selection.

You can, however, choose to set PBC off, and play the entire VCD without returning to the menu display, just like audio CDs.

This, for example, allows you to use repeat and programmed play for VCDs with PBC.

For more information on PBC, see "TYPES OF VIDEO CDS", page 17.

1Load the VCD.

2Press PBC on the main unit during play or in stop

mode.

Alternatively, press PBC while pressing SHIFT on the remote control.

"PBC" disappears from the display, and the play using menu is disabled.

NOTE

•If PBC is pressed while pressing SHIFT during play, play stops before the PBC mode changes.

•You can set the unit’s preference whether to play VCDs with PBC or not. See "PBC", page 47.

SELECTING A TRACK WITH THE REMOTE CONTROL (VCD ONLY)

A track can be selected directly by entering the track number on the remote control, either during play or in stop mode.

To use this feature with VCDs that support PBC, turn off PBC first (see "PLAYING A VCD WITHOUT USING PLAYBACK CONTROL" on this page).

Press the numbered buttons for the desired track.

Example:

To play track 12, press +10, 2.

To play track 20, press +10, +10, 0.

Play begins at the beginning of the selected track and continutes to the end of the disc.