Aiwa XR-DV3M Listening to External, Sources, To Play the Equipment Connected to the AUX in Jacks

LISTENING TO EXTERNAL	VIEWING PICTURES OF
SOURCES	EXTERNAL SOURCE

MOITOR ON/OFF

VIDEO AUX VIDEO

OTHER CONNECTIONS

TO PLAY THE EQUIPMENT CONNECTED TO THE AUDIO IN JACKS

1Press VIDEO.

"VIDEO" appears on the display.

2Play the connected equipment.

NOTE

When connecting monaural sound source, connect the sound source to either the AUDIO IN L (left channel) or AUDIO IN R (right channel) jack. The sound will be heard only from the speaker unit corresponding to the jack used.

TO PLAY THE EQUIPMENT CONNECTED TO THE AUX IN JACKS

1Press AUX.

"AUX" appears on the display.

2Play the connected equipment.

To adjust the volume level of the connected equipment

To adjust the volume level of the equipment connected to the AUDIO IN jacks, press VIDEO, then press ror trepeatedly. To adjust the volume level of the equipment connected to the AUX IN jacks, press AUX, then press r or t repeatedly.

The volume level can be adjusted in 8 steps from MIN (minimum) to MAX (maximum).

To view pictures played on equipment connected to the VIDEO IN jack, using the monitor screen of this unit, proceed as follows:

1Press VIDEO.

"VIDEO" appears on the display.

2Open the monitor and press MONITOR ON/OFF to turn the monitor on, if it has been turned off.

3Play the connected equipment.

NOTE

To listen to the sound played by the external source, connect it also to the AUDIO IN jacks of this unit.

En

ENGLISH 39