Aiwa XR-DV3M operating instructions DTS Output, Down MIX Type

DTS OUTPUT

"dts Output" sets the dts output as to whether the connected amplifier contains a DTS decoder or not.

The default setting is "dts OFF".

1Select "Audio Output Setting" by using i/k in the setup

menu. Then press ENTER.

2Use i/k to move the cursor to "dts Output".

Audio		Output Setting
	Choice The Item ik
1		Digital Stream	Down Mix PCM
	2	dts Output	OFF
	3	Down Mix Type	Surround
	ENTER : Choice item		RETURN : Previous menu
	SETUP : Completion

3Press ENTER.

4Use i/k to move the cursor to the setting suited to your configuration.

dts Output

Choice The Item ik

1	dts	ON
2	dts	OFF
ENTER : Choice item		RETURN : Previous menu
SETUP : Completion

dts ON

Select this option if the unit is connected to an amplifier with a DTS decoder.

dts OFF

Select this option if the unit is connected to an amplifier without a DTS decoder.

5Press ENTER. Your entry is saved.

6Press vRETURN to return to the previous screen, or press

SET UP to exit the setup menu.

CAUTION

If the AV amplifier is not equipped with a DTS decoder, do not select "dts ON" in the "dts Output" when connecting the AV amplifier with an optical connecting cord.

Merely attempting to play a DVD may cause a high level of noise which could be harmful to your ears and damage the speakers. In such a case, be sure to select "dts OFF".

NOTE

When playing a disc that supports the DTS Digital Surround while "dts Output" is set to "dts ON", no sound will be heard from the unit's speakers and the headphones connected to the PHONES jack.

DOWN MIX TYPE

"Down Mix Type" selects the type of signal output from the LINE OUT jacks.

This setting is effective only when a Dolby Digital decoder or an amplifier with a built-in Dolby Digital decoder is connected to the LINE OUT jacks.

The default setting is "Surround Mode".

1Select "Audio Output Setting" by using i/k in the setup menu. Then press ENTER.

2Use i/k to move the cursor to "Down Mix Type".

Audio		Output Setting
	Choice The Item ik
1		Digital Stream	Down Mix PCM
2		dts Output	OFF
	3	Down Mix Type	Surround
	ENTER : Choice item		RETURN : Previous menu
	SETUP : Completion

3Press ENTER.

4Use i/k to move the cursor to the setting suited to your preference.

Down Mix Type

Choice The Item ik

1Stereo Mode

2Surround Mode

ENTER : Choice item	RETURN : Previous menu
SETUP : Completion

Stereo Mode

Select this option to listen to the sound in normal stereo effect.

Surround Mode

Select this option to listen to the sound with surround effect.

5Press ENTER.

Your entry is saved.

6Press vRETURN to return to the previous screen, or press

SET UP to exit the setup menu.

44 ENGLISH