Aiwa XR-DV3M operating instructions Connections, Connect the speaker cords to the speakers

CONNECTIONS

Check your accessories

Remote control AM loop antenna FM antenna

Operating Instructions, etc.

Before connecting the AC cord

The rated voltage of your unit shown on the rear panel is 120 V AC. Check that the rated voltage matches your local voltage.

IMPORTANT

•Connect the speakers, antennas, and all optional equipment first. Finally, connect the AC cord.

•There are no differences between the two speaker units. Both speakers can be connected as L (left) or R (right).

1Connect the speaker cords to the speakers.

Connect the cords with the white stripes to ) terminals and the other cords to ( terminals.

2Connect the speaker cords to the main unit.

The cords with the white stripes should be connected to the 0 terminals and the other cords to the 9 terminals.

3Connect the supplied antennas.

Connect the FM antenna to the FM 75 Ω terminals and the AM antenna to the AM LOOP terminals.

FM antenna

AM antenna

6 ENGLISH