AMX System Configuration
K
A
DAK
177
Add, Edit and Delete Restart and Exit Procedures
To add a new procedure, click on the Add button below the list. A new procedure named
---New--- will appear at the bottom of the list. Click on the name ---New--- and it will
be opened ready for editing. Enter the name of your procedure.
To edit an existing procedure's name, double click on the name in the object list. The
name will be opened ready for editing.
To delete an existing procedure, click on the procedure's name in the object list. Then
click on the Delete button below the list. Be careful because you cannot undo a deletion.
The procedure names in the object list can be rearranged by dragging a procedure's name
to the desired position in the list. You cannot drag a procedure directly to the end of the
list. To do so, first drag the procedure name to precede the last name on the list. Then
drag the last name on the list to precede its predecessor on the list.
Note
The Restart and Exit Procedures for all AMX Managers
will be automatically provided by the Configuration
Manager. You MUST NOT repeat them in your list of
application Restart or Exit Procedures.