
Introduction
During a reboot, the system performs the following tasks:
—repairs any minor corruptions automatically, which, if left uncorrected, could eventually lead to catastrophic failure
—checks the “sanity” of its configuration
—reloads drivers
—
■creating and changing voice mail group lists for CAS alarm notification
AUDIX Voice Power group lists must be created, configured, and maintained for CAS alarm notification. Additional information is provided in Chapters 3 and 4 and Appendix C.
■monitoring error messages
Each application has error logs; be sure to check the error logs periodically and follow the suggested instructions when problems or potential problems occur.
■setting the time and date
The time and date for IS III must be synchronized with the time and date for the MERLIN LEGEND system.
■checking printer status
If an optional printer is installed, you are responsible for ensuring that paper is loaded, and that the printer is turned on and functioning.
■reconciling the dial plan
Changes made at the switch cannot be automatically sent to the local Extension Directory. To keep the databases synchronized when changes are made at the switch, you are responsible for running the reconciliation program to download the revised information.
NOTE:
Check your application documentation to determine