Maintaining IS-III
Creating and Changing Group Lists
NOTE:
To change a group owner extension, skip this section and proceed to “Setting CAS Alarm Notification,” later in this chapter.
Use any
1.Log into AUDIX Voice Power as the general mailbox owner.
The AUDIX Voice Power Activity Menu is announced, including the following:
To change password or administer lists, press 5.
2.Press [ 5 ].
A submenu is announced, including the following:
To create list, press 1. To scan list, press 2.
To review and modify list, press 3 ...
3.If you are creating a list, press [ 1 ]. If you are changing a list, press [ 3 ].
You are prompted,
Enter owner’s extension and pound sign.
If it’s your list, press pound.
4.Enter the group list owner extension indicated on the CAS Alarm Notification Form, and then press [ # ]. If you are the group list owner, and are calling from your extension, just press [ # ].
The system repeats the group owner’s extension and then prompts you to enter the list ID and pound sign.
5.Enter the group list ID that you want to create or change, and then press [ # ]. A group list ID can consist of up to six digits, for example, 123456. In this case, you would press [ 1 ], [ 2 ], [ 3 ], [ 4 ], [ 5 ], [ 6 ] and then press [ # ].
The system repeats the group list ID and states the number of members already administered.
For example, if you are creating group list ID 123456, the system says,
List 123456 contains zero members.
