Using the Web-Based Advanced User Interface

Table of Contents

sections

1

2

3

4

5

6

7

8

9

10

Changing the Wireless Security Settings

Your Double N+ Wireless Router is equipped with the latest security standard called Wi-Fi Protected Access™ 2 (WPA2™) and the legacy security standard called Wired Equivalent Privacy (WEP).. Your Router also supports the Wi-Fi Protected Setup™ (WPS) specification, which simplifies the setup of a wireless network.. WPS uses familiar methodologies, such as typing in a Personal Identification Number (PIN) or pushing a button, to enable users to automatically configure network names and strong WPA™/WPA2 data encryption and authentication.. By default, wireless security is disabled.. To enable security, you will need to determine which standard you want to use.. To access the security settings, click “Security” on the “Wireless” tab..

Using Wi-Fi Protected Setup

WPS recommends that you set up WPA2 (described on page 44) as your wireless security.. WPS does not provide additional security, but rather simplifies the addition of wireless devices to your wireless network..

You may use either the Push Button Configuration (PBC) method or PIN method to allow a device access to your wireless network:

PBC: Push and hold the WPS button located on the front of your Router for two seconds and the security LED will flash, indicating that WPS has been initiated.. Then, initiate WPS on the client device within two minutes (refer to your client’s documentation on this procedure).. The wireless device and Router will automatically exchange a security key and establish a secure connection..

PIN: The client device has a WPS PIN number (eight digits) that will be provided to you when you initiate the connection to the Router.. Enable WPS through the screen illustrated to the right.. Enter the client’s PIN into the Router’s internal registrar (accessed through this screen).. The client will be securely enrolled into your wireless network within two minutes..

Double N+ Wireless Router

42

Page 44
Image 44
Belkin F6D6230XX4 user manual Changing the Wireless Security Settings, Using Wi-Fi Protected Setup