CHAPTER 9: Using the On-Screen Display (UICD Consoles Only)
111
9.3.2.E Setting Users’ Access Privileges
At the User-List Menu, take these steps to configure access privileges for each user:
1. Highlight the user for whom you want to configure access.
2. Press [F3] to bring up the user-access options.
3. Highlight the first listed computer channel.
4. Use the spacebar to cycle through the available choices:
• The selected user has no access (blank);
• The selected user has video access only (“V”);
• The selected user has video and keyboard/mouse access (“V K”); or
• The selected user has full video, keyboard/mouse, and power-control access (“V K P”).
These changes to user access take effect instantly, even if you press [Esc] to exit the menu afterward.
5. Repeat steps 3 and 4 for each attached computer.
6. Press [Enter] or [Esc] to return to the User-List Menu.
Table 9-3. Administrator options available at the User-List Menu.
Press This Key
Sequence... ...To Do This
[F1] Get context-sensitive help.
[F2] Bring up the user-setup window, where you can configure the selected user’s name,
timeout in minutes, and (if desired) password.
[F3] Configure the selected user’s access privileges to each listed server. Use the spacebar
to scroll through the available choices:
Blank stands for no privileges;
“V” stands for video (viewing) privileges only;
“K” stands for keyboard and mouse privileges;
“P” stands for power-control privileges.
[F4] Quickly edit the name of the selected user.
[F5] Set the administrator password and timeout.
[F10] Log out of the ServSwitch Multi system. The user-login screen will appear. You will
have to log back in to the system to continue operation.
[F11] See more options.
[Insert] Add a new user profile to the menu.
[Delete] Remove the selected user profile from the menu.
[Alt] + [Tab] Cycle through the available menus.