CHAPTER 10: Using Management and Serial Control Cards
115
10. Using Management and SerialControl Cards
The ServSwitch Multi Management Card (KV1608C-R2) and Serial Control Card (KV1609C) add advanced
serial-control features to the ServSwitch Multi. For an introduction to these Cards and for instructions on how
to install them and their associated cables and equipment, see Chapter 5.

10.1 Addressing Terminals on the Serial Control Card

Since each Serial Control Card has four ports, channel addressing (for port-selection purposes) requires more
than just a chassis number and slot letter. You must also designate which port on the Serial Control Card the
terminal is attached to. Ports are numbered from top to bottom as shown in Figure 10-1.
Figure 10-1. Port addresses on a Serial Control Card.
For example, the terminal attached to the second port on the Serial Control Card in slot D of chassis 15 would
be addressed “l5D2.”
Port 1
Port 2
Port 3
Port 4