2.048Mbps Wireless Modem
4.From the Add/Remove Echo Cancellation on voice channels menu, type 2 to select the Clear (Remove) Channels menu.
5.View the current list of channel with echo cancellation. If channels in which echo cancellation should not be used are included, enter the numbers of the channels that should be removed from the list. Enter numbers between 1 to 31 separated by a comma. Use two dots to indicate a range. e.g. 2,5..7 means remove echo cancellation from channels 2, 5, 6 and 7.
6.Activate the new settings by selecting 4 from the Main Menu (System Reset) to reset the unit after configuration. The system must be reset for the modified parameters to take effect.
7.Verify link functionality using the LED indicators (See page 15, for LEDs description).
8.Further configuration may be done using the setup and configuration functions, as described in Chapter 3.
Note: A unit running software version 1.7 is not compatible and cannot be connected in a link to a unit running software version 1.6 and earlier.
Antennas, Cables and Accessories
There is a variety of standard antennas, cable types, and RF accessories for different gain levels available.
Antennas
Basic Antenna (Uni-8.5)
The basic antenna has a gain of 8.5 dBi. Low alignment accuracy is required because of the relatively large beam width (75 degrees horizontal, 50 degrees vertical ). It is intended for indoor or outdoor installation in locations with relatively short distances between sites. UNI- 8.5 dimensions are: 101 x 95 x 32 mm. (4 x 3.75 x 1.25 in.).
22 | SALES: 0118 965 5100 |
