66
2.048Mb
p
s Wireless Modem
SALES: 0118 965 5100
• Copy local database and download to remote unit.
Table 3-12. REMOTE Parameters Menu Options
Switch to Remote Monitor
When selecting option 1 (Switch to remote monitor) in the REMOTE Parameters Menu, the
database of the remote unit starts loading into the local unit. This process takes some time,
and the time required is even longer if the quality of the link is poor. Once the remote
database is loaded, you can view or change the parameters of the remote unit. At this state, an
indication of being in “Remote Monitor” mode appears at the end of the first line of each
menu.
Switch to Local Monitor
When selecting 2 in the REMOTE Parameters Menu, the “Switch to local monitor” menu
appears:
0 – Switch back to local monitor (remote database will be lost)
1 – Do not switch back to local monitor.
Note: If parameters of the remote units were changed, select 4 in the REMOTE Parameters
Menu (Download remote database to remote unit) before switching back to local monitor
mode. Note that this takes effect only after resetting the unit.