2.048Mbps Wireless Modem
•Set “Number of links to synchronize” to a value greater or equal to the actual number of connected links. This setting is not necessary for the “Slave” units.
Note: Selecting the option “Synchronize as many links as possible” may result in less than optimal performance. Use this option only in situations where
•Use the following table to determine the maximum number of links to synchronize:
Table 2-7. Maximum Number Synchronized Links
•Set “Network I.D.” for the links consecutively from 1 up to the “Number of links to synchronize” (assign a different Network I.D. for each link). Note: You can access the above parameters through the Setup and Configuration Menu (in Chapter 3).
•If several links are established between two “centers”, define the units in one of the centers as Master.
42 | SALES: 0118 965 5100 |
