2.048Mbps Wireless Modem
Table 3-2. Fractional E1 parameters Menu Items and Actions
Remote Alarm Method
Two methods may be used to indicate to the end equipment of an alarm condition following loss of synchronization:
•Bit 3 of TS (Time Slot) 0: Under normal conditions, this bit is always set to 0. Upon identification of an alarm condition, it is set to 1.
•Unframed all ones: The transmitted signal comprises a continuous sequence of ones without any ramming or other signalling messages The Remote alarm method should be set in accordance with the configuration of the end equipment.
TECHNICAL: 0118 931 2233
49
