Event Memory
The D9112 uses event memory to store events for each area. You can view the events for an area at a D1255 Command Center assigned to the area. The D9112 panel clears the events for an area from event memory and starts storing new events when you master arm the area.
Event Log
The D9112 stores up to 500 events and event modifiers from all areas in it's event log. Event modifiers add information about an event to the log. Some events are always followed by a modifier. For example, the D9112 adds at least two items to the log each time you arm or disarm an area, the open (or close) event and an event modifier showing the previous arming state.
All events and their modifiers are stored even if the D9112 does not send a report for them. You can view the log at a D1255 Command Center, print it locally using the D9131 Parallel Printer Interface and a parallel printer, or upload it to a D5300 Remote Account Manager II (RAM II).
See S- View Log in the Security System User's Guide
EMI/Lightning Transient Protection
The D9112 maintains the Radionics high level of quality and field dependability. Its design significantly reduces electromagnetic interference and malfunction generally caused by lightning.
Programming
Use either the Radionics D5200 Programmer, or the D5300 Remote Account Manager II (RAM II) to program the D9112. Refer to the D9112 Program Entry Guide
| D9112 Operation & Installation Manual |
|
| © 1993 Radionics | |
| Page 9 |
