Brother 8060P MFC-9060 owner manual Setup Send

O N - S C R E E N P R O G R A M M I N G 23

2. SETUP RECEIVE
Function		Description	Factory Set		Chapter
1.	RING DELAY	Number of rings before the	02		5
		machine answers in Fax/Tel
		(F/T) or Fax Mode.
2.	F/T RING TIME	Sets the time for “F/T pseudo-	30		5
		ring” in Fax/Tel ( F/T) Mode.
3.	FAX DETECT	Receive fax messages without	ON		5
		pressing the Start key.
4.	REMOTE CODE	Enter a code to activate or	OFF		5
		deactivate your machine from a	(	51, #51)
		remote location.
5.	REDUCTION	Reduces size of image.	AUTO		5
6.	MEM. RECEIVE	Automatically stores any	ON		5
		incoming faxes in its memory
		if it runs out of paper.
7.	PRINT DENSITY	Adjusts printing to be lighter or	--		5
		darker.
8.	POLLING RX	You call another fax machine to	--		5
		receive a fax from it.
9.	TONER SAVE	Increase life of toner cartridge.	OFF		5
3. SETUP SEND
Function		Description	Factory Set		Chapter
1.	COVERPG SETUP	Automatically sends a	OFF		6
		programmable cover page or
		prints a sample coverpage.
2.	COVERPAGE NOTE	Program a customized message	--		6
		for fax cover page.
3.	CONTRAST	Change the lightness or	AUTO		6
		darkness of a fax you are
		sending.
4.	RESOLUTION	Allows you to change	STANDARD		6
		resolutions page by page.
5.	OVERSEAS MODE	Special setting for international	OFF		6
		transmissions.
6.	CALL RESERVE	You can send a fax, then speak	OFF		6
		to the person operating the
		other fax machine or print a
		sample call back message.
7.	TIMER	Set the machine to send your	--		6
		documents later.