
4 | 27 |
| |
C H A P T E R F O U R |
|
Initial |
|
Setup |
|
Getting Started
Setting the Dialling Mode (Tone/Pulse)
Your machine is initially set to TONE. If you are using a PULSE dial line, you can change the setting to PULSE by following the steps below.
1Press Menu, 1, 1.
The screen prompts you to select TONE or PULSE.
DIALLING:TONE
DIALLING:PULSE
2Use or
to select the dialling mode.
3Press Set when the screen displays the dialling mode you want.
4Press Stop to exit.
Setting the Date and Time
Your machine displays the date and time, and prints it on every fax you send.
In the event of a power failure, the machine maintains date and time information for about 12 hours. All other settings remain unaffected.
1Press Menu, 1, 2.
The screen prompts you to enter the year.
ENTER YEAR:XX
2Enter the last two digits of the year. The screen displays your entry.