52

C H A P T E R S I X

 

See “One Touch and Speed Dial” chap. 7

If you try to scan in and store a 51st fax, the machine will send it immediately, without storing it in memory.

If you get a MEMORY FULL message while scanning the first page of a fax press Stop to cancel a scan. If you get a MEMORY FULL message while scanning in a subsequent page, you’ll have the option to press Start to transmit the pages scanned so far, or to press Stop to cancel the operation.

1Make sure the document feeder is empty.

2Place the document in the feeder.

3Enter the fax number.

4Press Start. The machine starts scanning the document and the screen displays the job number (#XX) of the fax, and how much memory is available. When the machine starts dialling you can immediately repeat Steps 1 through 4 for the next fax.

Real Time Transmission

When you are sending a fax, the machine will scan originals into memory before sending. Then, as soon as the phone line is free, the machine will start dialing and sending the fax. If memory becomes full, the machine will send the document in real time, even if REAL TIME TX is set to OFF.

Sometimes you may want to send an important document immediately, without waiting for memory transmission. You can set REAL TIME TX to ON.

1Place the document in the feeder.

2Press Menu, 3, 9. The screen displays

9.REAL TIME TX

3To change the default setting, press or to select ON (or OFF) and go to Step 7. ––OR–– For the next fax transmission only, press or to select NEXT FAX ONLY.

REAL TIME TX:ON

4Press Set.

5 For the next fax only, press or to select ON (or OFF).

Page 62
Image 62
Brother 8060P MFC-9060 owner manual Real Time Transmission, Real Time TX, Real Time Txon