Brother 8060P MFC-9060 owner manual Printing a Fax from Memory, For Fax/Tel F/T Mode Only

44 C H A P T E R F I V E

See

“Setting Fax

Storage”

chap. 9

For Fax/Tel (F/T) Mode Only

When the machine is in Fax/Tel (F/T) Mode, it will use the F/T Ring Time (F/T pseudo-ringing) to alert you to a voice call. If you’re at the machine, you can lift the external telephone’s handset and press Tel to answer.

If you’re at an extension phone, you’ll need to lift the handset during the F/T Ring Time and press # 5 1 between the F/T pseudo-rings. If no one is on the line, or if someone wants to send you a fax, send the call back to the machine by pressing 5 1.

Changing Remote Codes

Remote Codes might not work with some telephone systems. The preset Activation Code is 5 1. The preset Deactivation Code is # 5 1.

If you are always disconnected when accessing your external TAD remotely, try changing the Activation Code from 5 1 to # # # and the Deactivation Code from # 5 1 to 1 1 1. You cannot use the same number for the Activation Code and the Deactivation Code.

To change Remote Codes

1Press Menu, 2, 4.

2Press or to select ON (or OFF).

REMOTE ACT.:ON

3Press Set when the screen displays the setting you want.

4If you want to, enter a new Remote Activation Code, then press Set.

ACT.CODE:*51

5If you want to, enter a new Remote Deactivation Code, then press

Set.

DEACT.CODE:#51

6Press Stop to exit.

Printing a Fax from Memory

If you have fax storage ON for remote retrieval, you can still print a fax from the machine’s memory when you are at your machine:

1Press Menu, 8, 4.

2Press Start.

3After all the data save in the memory is printed out. Press Stop.