34

C H A P T E R F O U R

 

Using TX Lock

You must use a password to switch TX Lock ON and OFF.

Setting Up the TX Lock for the First Time

1Press Menu, 0, 1.

The screen prompts you to enter the password, and then press Set.

NEW PASSWD:XXXX

ENTER & SET

2Enter a 4-digit number as a new password.

3Press Set.

The screen prompts you re-enter the password.

4

5

6

7

8

VERIFY:XXXX

ENTER & SET

Re-enter the password and press Set.

The screen displays

SET TX LOCK

SET PASSWORD

Press or to choose SET TX LOCK.

Press Set. The screen prompts you to enter the password.

PASSWORD:XXXX

ENTER & SET

Enter a 4-digit password, followed by Set.

This is the same as the security password of your machine already stored.

The screen displays ACCEPTED for 2 seconds, followed by TX LOCK MODE - TX Lock is now switched ON.

If the password you enter at Step 8 is incorrect, the screen would display WRONG PASSWORD. After 2 seconds the display will then return to normal (displaying the date & time). You must then start from Step 1 to set TX Lock.

Page 44
Image 44
Brother 8060P MFC-9060 owner manual Using TX Lock, Setting Up the TX Lock for the First Time