S E T U P R E C E I V E | 41 |
| |
|
|
NOTE: ■ When you use Auto Reduction to reduce incoming documents to fit on one page of recording paper, you can do so only as long as the original document is not longer than 35 cm. If the original is longer than 35 cm, the data will not be reduced and will carry over to print on a second page.
■When you use Auto Reduction and you receive an incoming document that is smaller than your recording paper, no reduction will take place, and you will get the same size recorded as the original.
Reception into Memory
As soon as the paper cassette becomes empty during fax reception, the screen will display CHECK PAPER; please put some paper in the paper cassette (see chap. 1).
If the MEMORY RECEPTION setting is ON at this time…
The current fax reception will continue, with the remaining page(s) being stored in memory, subject to available memory. Subsequent incoming faxes will also be stored into memory until the memory is full, following which no further incoming fax calls will be automatically answered; all data will be printed as soon as fresh paper is put in the paper cassette.
If the MEMORY RECEPTION setting is OFF at this time…
The current fax reception will continue, with the remaining page(s) being stored in memory, subject to available memory. Subsequent incoming fax calls will not be automatically answered until fresh paper is put in the paper cassette. The last fax received will be printed as soon as fresh paper is put in the cassette.
1Press Menu, 2, 6. The screen displays
6.MEM.RECEIVE
2Use 
or 
to select ON or OFF.
3Press Set when the screen displays your selection.
4Press Stop to exit.
