Brother 8060P MFC-9060 owner manual Speed Dialling, Pause, On Hook Dialling, Search

70 C H A P T E R E I G H T

See “Storing Speed Dial Numbers” chap. 7

See

“Storing One

Touch Dial

Numbers”

and

“Storing

Speed Dial

Numbers”

chap. 7

Speed Dialling

1Pick up the external telephone’s handset.

2When you hear a dial tone, press Search/Speed Dial, press #, then press the two-digit Speed Dial number.

3To hang up, replace the external telephone’s handset.

If you are sending a fax, press Start after pressing the Speed Dial number. If you picked up the handset, press Start when the receiving fax machine answers with fax tone.

Pause

Press Redial/Pause to insert a pause between digits to be dialled.

If your fax machine is connected to a PABX, you may need to insert an additional number prefix (e.g. “9”) and a “pause” before each fax or telephone number to gain access to the outside line. When you press Redial/Pause, a dash “-” will appear on the display. By storing a pause, you can create a delay of 3.5 seconds.

On Hook Dialling

1Dial the number by using the dial pad or One Touch key, or Search/ Speed Dial and then two-digit Speed Dial number.

2The number you are dialling, or the name you have stored for One Touch or Speed Dial is displayed on the LCD.

3Press Start.

4Pick up the external telephone’s handset and press Tel when you hear the caller at other end from the monitor speaker.

When you make a call by pressing Start after dialling, you can listen to the other end of the line from the monitor speaker, but they can’t hear you unless you pick up the external telephone’s handset.

If you accidentally press Tel before lifting the external telephone’s handset, the call will be disconnected.

Search

You can search for names you have stored in One Touch and Speed Dial memories. Names are stored alphabetically.

1Press Search/Speed Dial, then enter the first letter of the name you’re looking for.

2Press or to search the memory.