Brother 8060P MFC-9060 owner manual H a P T E R S E V E N T E E N

138 C H A P T E R S E V E N T E E N

ERROR MESSAGE	CAUSE	ACTION
COOLING DOWN	The temperature of the drum	You must wait and allow
PLEASE WAIT	unit or toner cartridge is too	the machine to resume
	hot. The machine will pause	printing when it is ready.
	its current print job and go
	into cooling down mode.
	During the cooling down
	mode, you will hear the
	cooling fan running while
	the display on the machine
	shows COOLING DOWN
	and PLEASE WAIT.
COVER OPEN	The top cover was not	Open, then close, each cover.
	completely closed.
DISCONNECTED	The other party or other	Try to re-transmit or call the
	party’s fax machine	other party to see what
	terminated the call.	happened.
DOCUMENT JAM	Documents were not	Do not pull paper out until
	inserted or fed properly or	you see “Document Jam” in
	document was too long.	this chapter.
MACHINE ERROR XX	Machine has a mechanical	Unplug the machine.
	problem.	Then contact your Brother
		dealer for service.
MEMORY FULL	The fax machine memory	Unplug the fax machine and
(May occur when the fax	capacity has been exceeded.	plug it back in. Data
machine is used as a		remaining in the memory of
printer.)		the fax machine will be
		deleted.
		• If you have installed the
		Windows® driver, try again
		after setting the True Type
		mode to “Print as
		Graphics” in the PRINT
		menu of your application
		software.
		• Reduce the print resolution
		or reduce the complexity
		of your document.
NO RESPONSE/BUSY	The number you called does	Check the number and try
	not answer or is busy.	again.
	Or, you may have reached
	a number that is not
	connected to a fax machine.
NOT ASSIGNED	You tried to access a One	Set up the One Touch or
	Touch or Speed Dial number	Speed Dial number. See
	that is not programmed.	chap. 7.