
Changing Remote Retrieval Access Code
1Press Function , 8 , 7 .
2Enter a cannot be changed.
3Press Set .
4Press Stop to exit.
Remote Commands
Listen to Voice Messages
Press 9 1 .
then to Repeat a message press 1 . Skip to next message press 2 . Stop playing the message press 9 .
Record a Memo
Press 9 | 2 . |
Wait for the beep, then speak. | |
then to | Stop recording — Press 9 . |
2
Erase All Messages
Press 9 3 . If you hear three beeps, all messages have not yet been played, and the system will not erase.
Play/Record Outgoing Message
Press 9 | 4 . |
|
|
then to | Play Message Center OGM, press | ||
| 1 1 . |
|
|
| Play F/T OGM press 1 2 . | ||
| Record new Message Center | ||
| OGM, press 2 | 1 | , then speak |
| after beep. Press | 9 | to stop. |
| Record new F/T OGM press |
22 , then speak after beep. Press 9 to stop.
Change Paging/Fax Forwarding Setting
Press 9 5 .
then to Turn feature off press 1 .
Enter Fax Forwarding Number press 2 .
3
Enter Paging Number press 3 .
Program Fax Forward Number
press 4 . Enter the new number of the remote fax machine where you want your fax messages forwarded
and then press | . After two |
short beeps, press 9 | 6 1 . To |
retrieve a Memory Status List, enter the number of the remote
fax machine, and press | . |
Retrieve a Fax
Press 9 6 .
then to Print a Memory Status List press 1 , enter the number of remote fax machine, and then
. After the beep, hang up and wait.
4