Brother FAX 375MC, FAX 355MC owner manual One Touch Dialing, Speed Dialing, Hold, Pause

Speaker Phone

54 C H A P T E R E I G H T

One Touch Dialing

See	1	Pick up the handset— OR—Press Speaker Phone .
Storing One	2	When you hear a dial tone, press the One Touch key of the location you
Touch Dial
		want to call.
Numbers
p. 47	3	To hang up a voice call, replace the handset— OR—Press Speaker Phone .

If you try to use a One Touch location with no number stored in it, you hear a warning sound, and screen displays NOT REGISTERED. The display returns to normal after 2 seconds.

If you are sending a fax, press Start after pressing the One Touch key. If you picked up the handset, press Start when the receiving fax machine answers with fax tones.

See

Storing Speed

Dial Numbers

p. 49

Speed Dialing

1 Pick up the handset— OR—Press Speaker Phone .

2When you hear a dial tone, press Speed Dial , then press the two-digit Speed Dial number.

3 To hang up, replace the handset— OR—Press Speaker Phone .

If you are sending a fax, press Start after entering the Speed Dial number. If you picked up the handset, press Start when the receiving fax machine answers with fax tones.

Hold

1Press Hold/Caller ID to put a call on Hold.

2You can put down the handset without disconnecting the call.

3 Pick up the fax machine handset— OR—Press to release the call from Hold. Picking up an extension handset will not release the call from Hold.

Pause

Press Redial/Pause to insert a pause between numbers. Each key press adds a 3.5 second delay.