Trans. Verify

80

C H A P T E R T W E L V E

 

 

To Print a Report

1Press Function , 7 .

2Enter the number of the report you want to print. For example, press 3 to print the TEL-INDEX.

3Press Start .

4Press Stop to exit.

Transmission Verification (Xmit) Report

You can use the Xmit Report as proof that you sent a fax. This report lists the name or fax number of the receiving party, the time and date of transmission, and if the transmission was successful.

When the feature is OFF, the report is printed automatically only if there’s an error during transmission. If the report indicates NG, send the document again. If the report indicates you should check the readability of certain pages, resend those pages. For successful transmissions, you can print the Xmit Report for

the last fax by pressing .

When the feature is ON, the report is printed with every fax you send.

1Press Function , 7 , 1 .

2Press or to select ON or OFF and press Set .

3Press Stop to exit.

Using the Trans. Verify Key

To print the Transmission Verification (Xmit Report) for only a few important faxes, turn the report off ( Function , 7 , 1 ). Then you can press the Trans. Verify key to print the Xmit Report for the last fax you sent.

Page 94
Image 94
Brother FAX 375MC, FAX 355MC To Print a Report, Transmission Verification Xmit Report, Using the Trans. Verify Key