Canon L380S manual Transmission TX Reports, Error TX Report, 13-3

Transmission (TX) Reports

The machine normally prints a report only when an error occurs during sending (ERROR TX REPORT). However, you can set the machine to print a report every time you send a document (TX REPORT).

If you send a document using memory, you can also select whether the first page of the document is printed with the report. See “1.TX REPORT” in the <REPORT SETTINGS> menu on p. 16-7 for details on setting these options.

ST. TIME	Represents the time the last attempt was made to transmit a document.
TIME USE	Represents the amount of time it took during the last attempt to transmit. Please note that
	the usage time does not reflect the total usage time used to transmit all pages of the
	document when “retry” occurs. By printing an ACTIVITY REPORT and matching the
	transaction number of the TX REPORT with a transaction number in the ACTIVITY
	REPORT you can find out exactly how many attempts were made to send the document,
	how many pages were sent in each attempt as well as the usage time for each attempt.
PAGES SENT	Represents the number of pages that were successfully transmitted.
RESULT	OK	means that all pages were transmitted either during the first attempt or after the first
		or second retry.
	NG	means that either some or no pages were transmitted after 2 retries.

Error TX Report

31/12 2005 10:32 FAX 123xxxx	WORLD ESTATE,INC.		001
❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉
❉ ❉ ❉	ERROR TX REPORT		❉ ❉ ❉
❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉
TX FUNCTION WAS NOT COMPLETED
TX/RX NO	0006
DEPT. ID	000111
DESTINATION TEL #	1 213 978	3314
DESTINATION ID	JOHN BARRISTER
ST. TIME	31/12 10:30
TIME USE	00’00
PAGES SENT	0
RESULT	NG	STOP

13

Reports and Lists

DEPT ID is listed only while the department ID management is ON.

Transmission (TX) Reports 13-3