Canon L380S Setting the Energy Saver Mode Manually, Restoring from the Energy Saver Mode

2

Setting Up Your Machine

Energy Saver Mode

The machine provides an energy saver function. When no operations are performed for about 5 minutes, the machine automatically enters the energy saver mode.

NOTE

•The time until the machine enters the energy saver mode can be specified in a range of 3 minutes to 30 minutes. You can also turn off the energy saver function. (See Chapter 16, “The Menu System.”)

•The energy saver function does not activate when the machine is in the following status:

-When printing out copies, faxes or other pages

-When sending or receiving faxes

-While a copy job is saved in memory or when the reserve copy or other functions are operating, or when the In Use/Memory indicator lights up

-When paper jams occur

-When an error code appears and the Alarm indicator flashes

-When no paper is loaded in the cassette

Setting the Energy Saver Mode Manually

1 Press [Energy Saver].

The LCD is turned off and [Energy Saver] lights up.

NOTE

Right after the machine is restored from the energy saver mode, or right after copying finishes, wait about 2 seconds before pressing [Energy Saver].

Restoring from the Energy Saver Mode

1 Press [Energy Saver].

[Energy Saver] goes off and the machine enters standby mode.

NOTE

The machine can be restored from the energy saver mode immediately. However, it may vary according to room temperature and circumstances.

2-16Energy Saver Mode