Canon L380S Confirming Transmission Results and Sending Reservation, Deleting a Fax Job, 12-2

12

System Monitor

Confirming Transmission Results and Sending Reservation

Follow the procedure below to confirm the sending or receiving results and sending reservation (automatic redialing and delayed sending).

1 Press [System Monitor] repeatedly until <FAX MONITOR> is displayed.

2 Press [ (-)] or [ (+)] to select <2.TX/RX RESULT> ➞ press [OK].

The sending result and reservation can be confirmed by checking the sending time, <TX/RX NO.> or fax number.

3 Press [ (-)] or [ (+)] to confirm the sending result and reservation.

1 5:34 001 0 T X ST N D B Y [ 01] CAN O N U S A

NOTE

•To return to standby mode, press [Stop/Reset].

•If you perform the procedure above when there is no sending reservation and transmission jobs, <NO DOC. STORED> will appear, and the display will return to the display shown in step 2.

Deleting a Fax Job

Follow the procedure below to delete the documents waiting to be sent by automatic redialing or delayed sending.

1 Press [System Monitor] repeatedly until <FAX MONITOR> is displayed.

2 Press [ (-)] or [ (+)] to select <3.DELETE DOCUMENT> ➞ press [OK].

3 Use the numeric buttons to enter the transmission number of the fax job you want to delete ➞ press [OK].

		➞	O K	TO D E L E T E?
TX RX N O .	0 0 5 5		<	YES	N O >

NOTE

You can check the transmission number of the reserved fax job by printing the DOCUMENT MEMORY LIST. (See p. 13-14.)

4 If you want to delete the fax job, press [ (-)] for <YES>.

If you change your mind and do not want to delete the fax job, press [ (+)] for <NO>.

12-2 Checking the Status of Copy, Fax, Print and Report Jobs