Canon L380S manual Pstn, Hooking, Print Error only, 16-7

Name		Descriptions
4.DENSITY CONTROL	Adjusts the scanning density.
1.LIGHT	Sets for dark documents. (3)
2.STANDARD	Sets for standard documents. (5)
3.DARK	Sets for light documents. (7)
5.OFFHOOK ALARM	Enables/disables the offhook alarm that alerts
	you when the handset is not in the handset
	cradle.
ON	After reception, the offhook alarm sounds when
	the handset is left off the hook.
OFF	No offhook alarm.
6.R-KEY SETTING	Sets how the fax connects to PBX. If your fax
	machine is not connected through a PBX, you
	can ignore these settings.
PSTN	The fax is connected to the outside line.
PBX	The fax is connected through a PBX. Select
	one of the following settings, depending on the
	type of PBX in service. Two settings are
	available:
	HOOKING
	PREFIX	If you select PREFIX, you can set
		a number up to 20 digits long,
		including the “P” at the end.
2.REPORT SETTINGS	Sets the report setting.
1.TX REPORT	Enables/disables automatic printing of a
	transmission report.
OUTPUT NO	No report is printed.
PRINT ERROR ONLY	Prints a report only when a transmission error
	occurs.
REPORT WITH TX IMAGE	Enables/disables printing of the first page of the
	fax under the report.
ON	Prints the first page.
OFF	No first page is printed.
	(The factory default setting is in bold face.)

16

The Menu System

Menu Descriptions 16-7