Canon L380S manual Enter the destinations using any of the following 4 methods

6

Sending Faxes

6 Enter the destination(s) using any of the following 4 methods.

●One-Touch Speed Dialing:

❑Press the desired One-Touch Speed Dial button(s).

●Coded Speed Dialing:

❑Press [Coded Dial] ➞ enter the two-digit code (00-99)* using the numeric buttons. *Enter a three-digit code (000 to 168) for the FAX-L390 model.

•Be sure to press [Coded Dial] before each code.

●Directory Dialing:

❑Press [Directory] ➞ enter the first letter of the name of the party you are searching for.

●Regular Dialing:

❑Enter the number using the numeric buttons or [Redial/Pause].

•You can enter 10 numbers.

•Be sure to press [OK] after your entry with the numeric buttons.

NOTE

If you make a mistake on regular dialing, open One-Touch Speed Dial panel ➞ press [Delete] or [ (-)] to delete the last digit, or press [Clear] to delete an entire entry when you use the numeric buttons.

7 Press [Start].

The machine scans the document into memory.

NOTE

•If the machine memory becomes full while scanning your document, <MEMORY FULL> appears in the LCD display. If this happens, you cannot send the document at a delayed time.

•You can only register one preset sending operation at a time.

•The machine is a multitasking machine, so you can send, receive, print, and copy other documents even when you have set the machine for delayed sending.

•To print, copy, or send other documents after setting the machine for delayed sending, simply follow the procedures described in this User’s Guide.

•To cancel a delayed sending, see “Deleting a Fax Job,” on p. 12-2.

•The machine can print a list of document stored in memory (DOCUMENT MEMORY LIST), along with the transaction number of each document. The document to be sent using delayed sending will be listed as <DELAYED TX> or <DEL SQ BDCST>. To print the list, see “Document Memory List,” on p. 13-14.

When the set time comes, the machine dials and sends the document.

6-16Delayed Sending