Canon L380S manual Paper Handling

4

Paper Handling

IMPORTANT

If the slide guides are not adjusted correctly for the size of the envelope, the quality of your printouts may be adversely affected.

2 Insert the envelope straightly in the multi-purpose feeder with the print side up and the right edge (i.e., closer to the stamp) first.

If the envelope to be loaded has a flap on the short edge, this edge must enter the machine first. Not loading it this way will result in a paper jam.

3 Specify the paper size.

❑Press [Menu] ➞ press [OK].

❑Press [(-)] or [(+)] to select <2.MP TRAY> ➞ press [OK] twice.

❑Press [(-)] or [(+)] to select <ENVELOPE> ➞ press [OK].

❑Press [(-)] or [(+)] to select the appropriate envelope type ➞ press [OK] twice.

NOTE

You can select <FREESIZE> instead of <ENVELOPE> as the paper size. When <FREESIZE> is selected, you can specify vertical and horizontal sizes of the envelope in the following ranges:

-<VERTICAL SIZE>: 127 mm to 356 mm

-<HORIZONTAL SIZE>: 76 mm to 216 mm

4 Specify the paper type.

❑Press [(-)] or [(+)] to select <HEAVY PAPER> or <HEAVY PAPER H> ➞ press [OK].

❑Press [Stop/Reset] to return to standby mode.

4-10Loading Paper