Canon L380S manual 14-9, Memory Full

	Message	Cause	Action
MEM IN USE nn %		Shows the percentage of memory	Wait for the machine to send any faxes in
		currently in use. This message is	memory. Also, print or delete any
		displayed when you set the document in	documents in memory you no longer
		ADF.	need.
MEMORY FULL		The memory is full because collate copy	Divide the document and copy each part
		was set when a large document is loaded.	separately.
NOT REGISTERED		The One-Touch Speed Dial button or	Register the One-Touch Speed Dial
		Coded Speed dialing code you entered	button or Coded Speed Dialing code.
		has not been registered.	(See pages 5-2 and 5-5.)
PRINTER DATA ERROR		Abnormality has occurred in the data	Use [System Monitor] to delete the
		transmission between the machine and	current print job or the final print job (If
		computer.	multiple jobs are being printed). Then you
			can shift to the next job. If you use
			<PRINTER RESET> of the Menu, all the
			print jobs are deleted. (See p.16-15.)
REC. PAPER JAM		There is a paper jam.	Clear the paper jam (See pages 14-1 to
			14-7.) and reload paper in the cassette or
			multi-purpose feeder. Then reset the
			machine by opening the printer cover and
			then closing it.
RECEIVED IN MEMORY		The machine received the fax in memory	Load correct paper size in the cassette,
		because paper or toner ran out, a paper	replace the cartridge, or clear the paper
		jam occurred, or incorrect paper size was	jam. (See p.7-6.)
		loaded.
REMOVE MP PAPER		Paper is loaded in the multi-purpose	Remove the paper from the multi-purpose
		feeder when the machine receives a fax	feeder. If the machine receives the fax
		or prints a report or list.	then paper is loaded in the multi-purpose
			feeder, the received document will be
			stored in memory.
REPLACE CARTRIDGE		The toner cartridge ran out of toner or is	Make sure the toner in the cartridge is
		not installed properly.	evenly distributed or the cartridge is
			installed properly.
			After doing this, if the message remains
			displayed or the print quality is low,
			replace the cartridge. (See p. 2-18.)
SCANNING		Memory is getting low during scanning	When memory space becomes available
		because the document has many	as printing continues, the scanning
MAKING SPACE IN MEM		graphics or photos.	resumes automatically.
			Then reset the machine by opening the
PLEASE WAIT			printer cover and then closing it.
START AGAIN		The paper in the cassette has run out, the	After loading paper in the cassette,
		toner has run out, paper jams have	replacing the cartridge, clearing jams, or
		occurred, or the paper size setting is	specifying the correct paper size, print the
		wrong while the report is printing.	report again.
SUPPLY REC. PAPER		No paper is loaded in the cassette.	Load paper in the cassette. (See p. 2-21 to
CASSETTE			2-23.) Make sure the paper stack in the
			cassette does not exceed the capacity of the
			cassette.
			If you load paper while making copies, do
			not load a different paper size.

14

Troubleshooting

LCD Messages 14-9