Canon L380S manual Using One-Touch Speed Dialing, TEL=1 2 3 x x Ca no n U . K

5

Speed Dialing

6 Press the numeric buttons to enter the new name ➞ press [OK].

For details on how to enter or delete letters, see “Entering Numbers, Letters, and Symbols,” on p. 3-1.

7 To change additional numbers and/or names, repeat steps 2 to 6.

-or-

If you have finished changing numbers and/or names, press [Stop/Reset] to return to standby mode.

Using One-Touch Speed Dialing

Once you have registered your numbers under One-Touch Speed Dial buttons, you can use them to send documents as follows:

1 Load the document in the ADF.

For details on the types of documents you can fax, their requirements, and how to load documents, see “Document Requirements,” on p. 6-1, and “Loading Documents in the ADF,” on p. 6-3.

2 Press [FAX].

If you are already in the Fax standby mode, you can skip this step.

3 Adjust any necessary settings for your document.

•Press [Image Quality] to select the fax resolution. (See “Adjusting the Image Quality (Resolution),” on p. 6-4.)

•Press [Exposure] to select the scan density. (See “Adjusting the Exposure (Density),” on p. 6-5.)

4 Press the One-Touch Speed Dial button assigned to the number to which you wish to fax.

TEL=1 2 3 x x xx

04Ca no n U . K .

•The name registered under that One-Touch Speed Dial button is displayed. If no name is registered, the number registered under that button will be displayed.

•If you mistakenly press the wrong One-Touch Speed Dial button, press [Stop/Reset] ➞ press the correct button.

•If no fax number is assigned to the One-Touch Speed Dial button you press, the LCD displays <NOT REGISTERED>. If this happens, make sure you press the correct button and that the number you want to dial is registered under that button.

5 Press [Start].

•If you do not press [Start] within 5 seconds of pressing the One-Touch Speed Dial button, the machine will begin sending automatically. If you do not want the machine to send automatically, you need to change the <TIME OUT> setting. See p.16-9 for more details.

•If an error occurs during sending, the machine will print an error report. If this happens, try sending the fax again. See “Faxing Problems,” on p. 14-15 for details about errors.

NOTE

You can also use One-Touch Speed Dialing to send a document to more than one location at a time. For details, see “Group Dialing,” on p. 5-9, and “Sequential Broadcasting,” on p. 6-13.

5-4 One-Touch Speed Dialing