Canon L380S Manual Sending Via the Handset, Follow this procedure for manual sending

Manual Sending Via the Handset*

Use manual sending when you want to talk to the other party before sending a document, or if the other party does not have a fax machine that can receive automatically.

NOTE

You will need to connect a telephone to the machine if you want to talk to the other party before sending a document.

*With optional handset or other telephone connected. This feature is available for certain countries only.

Follow this procedure for manual sending:

1 Load the document in the ADF.

For details on the types of documents you can fax, their requirements, and how to load documents, see “Document Requirements,” on p. 6-1, and “Loading Documents in the ADF,” on p. 6-3.

2 Press [FAX].

If you are already in the Fax standby mode, you can skip this step.

3 Adjust any necessary settings for your document.

•Press [Image Quality] to select the fax resolution. (See “Adjusting the Image Quality (Resolution),” on p. 6-4.)

•Press [Exposure] to select the scan density. (See “Adjusting the Exposure (Density),” on p. 6-5.)

4 Pick up the handset.

5 Dial the other party’s fax/telephone number.

For details on the different dialing methods, see “Dialing Methods,” on p. 6-7.

6 Talk through the handset to the other party.

If you hear a high-pitched signal instead of the other party’s voice, go to step 8.

7 Ask the other party to set their fax machine to receive faxes.

8 When you hear a high-pitched signal, press [Start] ➞ hang up the handset.

NOTE

To cancel manual sending, press [Stop/Reset].

6

Sending Faxes

Sending Documents 6-9