Canon L380S Sending Methods, Memory Sending, Manual Sending Via the Handset, Densit Y C O N TRO L

6

Sending Faxes

3 Press [Exposure] repeatedly until the scanning density you want is displayed ➞ press [OK].

DENSIT Y C O N TRO L	➞	3 1/12 2	0 0 5	SA T 1 0 : 00
D A RK		F axOnl y		S T A N D A RD

4 Continue the operation you wish to complete.

If you do not proceed with any other operation, the LCD display returns to standby mode.

NOTE

•You can set the scanning density so that the desired scanning density such as STANDARD is automatically returned after the <AUTO CLEAR> function activates or documents are scanned. Since <SCAN DENSITY> of <FAX DEFAULT> is set to ‘OFF’ in the factory default setting, the scanning density set using [Exposure] will remain unchanged. (See Chapter 16, “The Menu System.”)

•You can set the level of each scanning density (LIGHT/STANDARD/DARK) in the <DENSITY CONTROL> of the Menu. (See Chapter 16, “The Menu System.”)

Sending Methods

Memory Sending

To use memory sending, you load the document, dial the fax number ➞ press [Start]. See p. 6-8 for more details on memory sending.

Since the machine is multitasking, you can even scan a document into the memory while sending a document, receiving a document, or printing a report.

Manual Sending Via the Handset*

Use manual sending via the handset if you want to speak with the other party before sending a fax to them. With manual sending via the handset, dial and converse normally, and when they are ready to receive your fax, press [Start] to begin sending. See p. 6-9 for more details on manual sending via the handset.

For manual sending via the handset, you need to have the optional handset or a telephone connected to your machine.

*With optional handset or other telephone connected. This feature is available for certain countries only.

6-6 Preparing to Send a Fax