Carrier 30RAP010-060 Unit Configuration Settings, OPTIONS1 Options Configuration, OPT1

III.Unit Start-Up (cont)

RECORD CONFIGURATION SETTINGS

UNIT (Configuration Settings)

SUBMODE	ITEM	ITEM EXPANSION	DISPLAY	ENTRY
		UNIT CONFIGURATION
	SIZE	UNIT SIZE	XXX
	SZA.1	COMPRESSOR A1 SIZE	XX
	SZA.2	COMPRESSOR A2 SIZE	XX
	SZA.3	COMPRESSOR A3 SIZE	XX
	SZA.4	COMPRESSOR A4 SIZE	XX
	SZB.1	COMPRESSOR B1 SIZE	XX
UNIT	SZB.2	COMPRESSOR B2 SIZE	XX
	SZB.3	COMPRESSOR B3 SIZE	XX
	SZB.4	COMPRESSOR B4 SIZE	XX
	SH.SP	SUPERHEAT SETPOINT	XX.X ΔF
	FAN.S	FAN STAGING SELECT	X
	EXV	EXV MODULE INSTALLED	YES/NO
	A1.TY	COMPRESSOR A1 DIGITAL?	YES/NO
	MAX.T	MAXIMUM A1 UNLOAD TIME	XX

PRESS ESCAPE KEY TO DISPLAY ‘UNIT’. PRESS DOWN ARROW KEY TO DISPLAY ‘OPT1’. PRESS ENTER KEY. RECORD CONFIGURATION INFORMATION BELOW:

OPTIONS1 (Options Configuration)

SUBMODE	ITEM	ITEM EXPANSION	DISPLAY	ENTRY
		UNIT OPTIONS 1 HARDWARE
	FLUD	COOLER FLUID	X
	MLV.S	MINIMUM LOAD VALVE SELECT	YES/NO
	D.G.EN	DISCHARGE GAS TEMP ENABLE	ENBL/DSBL
	CSB.E	CSB BOARDS ENABLE	ENBL/DSBL
	CPC	COOLER PUMP CONTROL	ON/OFF
	PM1E	COOLER PUMP 1 ENABLE	YES/NO
	PM2E	COOLER PUMP 2 ENABLE	YES/NO
OPT1	PM.P.S	COOLER PMP PERIODIC STRT	YES/NO
	PM.SL	COOLER PUMP SELECT	X
	PM.DY	COOLER PUMP SHUTDOWN DLY	XX MIN
	PM.DT	PUMP CHANGEOVER HOURS	XXXX HRS
	ROT.P	ROTATE COOLER PUMPS NOW	YES/NO
	EMM	EMM MODULE INSTALLED	YES/NO
	CND.T	CND HX TYP 0=RTPF 1=MCHX	0/1
	MOPS	EXV MOP SET POINT	XX
	APPR	CONFIG APPROACH SETPOINT	XX

CL-5