Carrier 30RAP010-060 specifications CCN Configuration Tables OPTIONS2 Options 2 Configuration

APPENDIX B — CCN TABLES (cont)

CCN CONFIGURATION TABLES — OPTIONS2 (Options 2 Configuration)

DESCRIPTION		VALUE	DEFAULT	UNITS	POINT NAME
Control Method	0	= Switch	0		CONTROL
	2	= Occupancy
	3	= CCN
Loading Sequence Select	1	= Equal Loading	1		SEQ_TYP
	2	= Staged Loading
Lead/Lag Circuit Select	1	= Automatic	1		LEAD_TYP
	2	= Circuit A Leads
	3	= Circuit B Leads
Cooling Setpoint Select	0	= Single	0		CLSP_TYP
	1	= Dual, remote switch controlled
	2	= Dual CCN occupancy
	3	= 4-20 mA input
Ramp Load Select	Enable/Dsable		Enable		RAMP_EBL
Heat Cool Select	Cool/Heat		Cool		HEATCOOL
High LCW Alert Limit	2 to 60		60.0	ΔF	LCW_LMT
Minutes off time	0 to 15		0	min	DELAY
Deadband Multiplier	1.0 to 4.0		1.0		Z_GAIN
Ice Mode Enable	Enable/Dsable		Dsable		ICE_CNFG
Low Sound Mode Select	0	= Disabled	0		LS_MODE
	1	= Fan only
	2	= Capacity/Fans
Low Sound Start Time	00:00 to 23:59		00:00		LS_START
Low Sound End Time	00:00 to 23:59		00:00		LS_END
Low Sound Capacity Limit	0 to 100		100	%	LS_LIMIT

CCN CONFIGURATION TABLES — SCHEDOVR (Timed Override Setup)

DESCRIPTION	VALUE	DEFAULT	UNITS	POINT NAME
Schedule Number	0 to 99	1		SCHEDNUM
Override Time Limit	0 to 4	0	hours	OTL
Timed Override Hours	0 to 4	0	hours	OVR_EXT
Timed Override	No/Yes	No		TIMEOVER

CCN CONFIGURATION TABLES — RESETCON (Temperature Reset and Demand Limit)

DESCRIPTION		VALUE	DEFAULT	UNITS	POINT NAME
COOLING RESET
Cooling Reset Type	0	= No Reset	0		CRST_TYP
	1	= 4-20 mA input
	2	= External temp – OAT
	3	= Return Fluid
	4	= External temp - SPT
4-20 MA RESET
4-20 – Degrees Reset	–30 to 30		0.0	ΔF	420_DEG
REMOTE RESET
Remote – No Reset Temp	0 to 125		125.0	°F	REM_NO
Remote – Full Reset Temp	0 to 125		0.0	°F	REM_FULL
Remote – Degrees Reset	–30 to 30		0.0	ΔF	REM_DEG
RETURN TEMPERATURE RESET
Return – No Reset Temp	0 to 125		10.0	ΔF	RTN_NO
Return – Full Reset Temp	0 to 125		0.0	ΔF	RTN_FULL
Return – Degrees Reset	–30 to 30		0.0	ΔF	RTN_DEG
DEMAND LIMIT
Demand Limit Select	0	= None	0		DMD_CTRL
	1	= External switch input
	2	= 4-20 mA input
	3	= Loadshed
Demand Limit at 20 mA	0 to 100		100	%	DMT20MA
Loadshed Group Number	0 to 99		0		SHED_NUM
Loadshed Demand Delta	0 to 60		0	%	SHED_DEL
Maximum Loadshed Time	0 to 120		60	minutes	SHED_TIM
Demand Limit Switch 1	0 to 100		80	%	DLSWSP1
Demand Limit Switch 2	0 to 100		50	%	DLSWSP2

93