Carrier 30RAP010-060 specifications III.Unit Start-Upcont, Component Test

III.Unit Start-Up (cont)

COMPONENT TEST

USE ESCAPE/ARROW KEYS TO ILLUMINATE CONFIGURATION LED. PRESS ENTER TO DISPLAY ‘DISP’. PRESS ENTER AGAIN TO DISPLAY ‘TEST’ FOLLOWED BY ‘OFF’. PRESS ENTER TO STOP DISPLAY AT ‘OFF’ AND ENTER AGAIN SO ‘OFF’ DISPLAY FLASHES. ‘PASS’ AND ‘WORD’ WILL FLASH IF PASSWORD NEEDS TO BE ENTERED. PRESS ENTER TO DISPLAY PASSWORD FIELD AND USE THE ENTER KEY FOR EACH OF THE FOUR PASSWORD DIGITS. USE ARROW KEYS IF PASSWORD IS OTHER THAN STANDARD. AT FLASHING ‘OFF’ DISPLAY, PRESS THE UP ARROW KEY TO DISPLAY ‘ON’ AND PRESS ENTER. ALL LED SEGMENTS AND MODE LEDS WILL LIGHT UP. PRESS ESCAPE TO STOP THE TEST. PRESS ESCAPE TO RETURN TO THE ‘DISP’ DISPLAY. PRESS THE ESCAPE KEY AGAIN AND USE THE ARROW KEYS TO ILLU- MINATE THE SERVICE TEST LED. PRESS ENTER TO DISPLAY ‘TEST’. PRESS ENTER TO STOP DISPLAY AT ‘OFF’ AND ENTER AGAIN SO ‘OFF’ FLASHES. PRESS THE UP ARROW KEY AND ENTER TO ENABLE THE MANUAL MODE. PRESS ESCAPE AND DISPLAY NOW SAYS ‘TEST’ ‘ON’. REFER TO THE TABLE BELOW.

Service Test Mode and Sub-Mode Directory

SUB-MODE	KEYPAD		ITEM	DISPLAY	ITEM	COMMENT	Completed
	ENTRY				EXPANSION		(Yes/No)
				ON/OFF	SERVICE TEST MODE	To Enable Service Test Mode,
		ENTER
						move Enable/Off/Remote
TEST
						Contact switch to OFF. Change
						TEST to ON. Move switch to
						ENABLE.
					OUTPUTS AND PUMPS
			FAN1	ON/OFF	FAN 1 RELAY	Condenser fan contactor 1
		ENTER
			FAN2	ON/OFF	FAN 2 RELAY	Condenser fan contactor 2
			FAN3	ON/OFF	FAN 3 RELAY	Condenser fan contactor 3
			FAN4	ON/OFF	FAN 4 RELAY	Condenser fan contactor 4
			FAN5	ON/OFF	FAN 5 RELAY	Condenser fan contactor 5
OUTS
			FAN6	ON/OFF	FAN 6 RELAY	Condenser fan contactor 6
			V.HPA	XXX%	VAR HEAD PRESS %
			V.HPB	XXX%	VAR HEAD PRESS %
			CLP.1	ON/OFF	COOLER PUMP 1 RELAY
			CLP.2	ON/OFF	COOLER PUMP 2 RELAY
			CL.HT	ON/OFF	COOLER/PUMP HEATER
			RMT.A	ON/OFF	REMOTE ALARM RELAY
					CIRCUIT A COMPRESSOR TEST
		ENTER	CC.A1	ON/OFF	COMPRESSOR A1 RELAY
			UL.TM	0 to 15	COMP A1 UnLOAD TIME
CMPA			CC.A2	ON/OFF	COMPRESSOR A2 RELAY
			CC.A3	ON/OFF	COMPRESSOR A3 RELAY
			CC.A4	ON/OFF	COMPRESSOR A4 RELAY
			MLV	ON/OFF	MINIMUM LOAD VALVE RELAY
					CIRCUIT B COMPRESSOR TEST
		ENTER	CC.B1	ON/OFF	COMPRESSOR B1 RELAY	See Note
CMPB			CC.B2	ON/OFF	COMPRESSOR B2 RELAY	See Note
			CC.B3	ON/OFF	COMPRESSOR B3 RELAY	See Note
			CC.B4	ON/OFF	COMPRESSOR B4 RELAY	See Note

NOTE: If the unit has a single circuit, the Circuit B items will not appear in the display, except the ability to configure circuit B will be displayed.

Copyright 2010 Carrier Corporation

Manufacturer reserves the right to discontinue, or change at any time, specifications or designs without notice and without incurring obligations.

Catalog No. 04-53300067-01 Printed in U.S.A. Form 30RAP-2T Pg CL-10 12-10 Replaces: 30RAP-1T

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -- - - - - - - - - - - - - - - - - - - - CUT ALONG DOTTED LINECUT ALONG DOTTED LINE