2-39
CiscoASR 9000 Series Aggregation Services Router Hardware Installation Guide
Chapter2 Unpacking and Installing the Chassis
Removing Components Before Installing the Chassis
Figure2-34 Removing a Switch Fabric Card from the CiscoASR 9912 Router Chassis
Step3 To remove a RP or line card (Figure2-35 or Figure 2-36), starting at the lowest numbered slot:
a. Use a screwdriver to loosen the captive screws at the ends of the line card front panel.
b. Pivot the ejector levers to unseat the card from the backplane connector.
c. Slide the card out of the slot and place it directly into an antistatic bag or other ESD-preventive
container.
aLoosen the captive screws. cPivot the ejector levers outward to unseat the card from the
backplane connector.
bPush in both ejector lever
release buttons.
dSlide the card out of the chassis.
a
a
c
c
b
b
d