2-21
CiscoASR 9000 Series Aggregation Services Router Hardware Installation Guide
Chapter2 Unpacking and Installing the Chassis
Removing Components Before Installing the Chassis
Removing a Fan Tray from the Cisco ASR 9006 Router
Follow these steps to remove a fan tray from the Cisco ASR 9006 Router (Figure2-17).
Step1 Loosen the captive screw that secures the fan tray door to the chassis and open the door.
Step2 Loosen the captive installation screw on the front of the fan tray you want to remove.
Step3 Using the handle on the front panel, pull the fan tray halfway out of the chassis.
Note Wait a few seconds for all the fans to stop rotating before lifting the fan tray from the chassis.
Step4 Slide out the fan tray completely from the chassis while supporting it with your other hand.
Caution Use two hands when handling the fan tray. The fan tray weighs about 7.6pounds (3.45 kg).
Figure2-17 Removing or Installing the Fan Tray on the Cisco ASR 9006 Router Chassis
243374