2-13
CiscoASR 9000 Series Aggregation Services Router Hardware Installation Guide
Chapter2 Unpacking and Installing the Chassis
Unpacking the Router
Unpacking the Cisco ASR 9912 RouterFollow these steps to unpack the CiscoASR 9912 Router from its wooden shipping container.
Step1 Remove any strapping on the outside of the crate.
Step2 Remove the crate cap door. Disengage the twist locks located along the bottom first. Then, disengage the
twist locks located along the sides, working your way up from the bottom to the top. Refer to the right
and middle figures in Figure 2-9.
Step3 Remove the crate cap. Disengage the twist locks located around the bottom of the crate cap (Figure2-9).
Note Two people are required to evenly slide the crate cap back off of the plastic pallet base.
Step4 Remove the foam packaging material from the top of the router.
Figure2-9 Unpacking the CiscoASR 9912 Router from the Shippi ng Container
Step5 Using a 5/16” wrench or ratchet, remove the four attachment bolts and cross-brace from the shipping
rack (Figure 2-10).
302353