2-66
CiscoASR 9000 Series Aggregation Services Router Hardware Installation Guide
Chapter2 Unpacking and Installing the Chassis
Installing Chassis Accessories
Figure2-58 Locations for the Six Ball Studs on the CiscoASR 9010 Router
Step5 Attach the left and right hinge brackets to the chassis using four screws for each bracket. Tighten the
screws to a torque of 11in-lb (1.20 N-m). The L-shaped brackets should align with the holes in the cable
management tray from which you removed the screws.
Step6 Secure the L-shaped brackets to the chassis and cable management tray by re-inserting and tightening
the cable management tray screws you removed (Figure 2-59).
303445