5-22
CiscoASR 9000 Series Aggregation Services Router Hardware Installation Guide
Chapter5 Replacing Cisco ASR 9000 Series Router Components
Removing and Replacing Power System Components
Figure5-13 Removing the Front Power Tray Bezel on the CiscoASR 9922 Router
Step5 For the Cisco ASR 9912 Router, the vented power tray bezel is a base chassis accessory that snaps onto
the front of the power system. comes with ball studs already installed. Remove it by pulling it away from
the chassis (Figure2-85).
Step6 Loosen and remove the four screws (two screws at each end) that attach the power tray to the chassis.
Step7 Loosen the two captive screws (one per ejector lever) to release the ejector levers. Figure5-14 shows the
process for the version 1 power trays, and Figure 5-15 shows the process for the version 2 power trays.
The process for version 3 power trays is similar to the process for version 2 power trays, as shown in
Figure 5-15.
Figure5-14 Removing a Power Tray—Version 1 Power Tray (CiscoASR 9010 Router Shown)
302359
247898
1
2
3